Free Shipping on Orders Over $200*
AEV’s HighMark Fender Flare kit for 2010-18 HD Ram trucks is not just another set of aftermarket cutout fender flares. This unique kit not only includes the fender flares but all the other details necessary to finish the job professionally, including new wheel liners, structural steel reinforcements and marker lights. These fender flares allow the fitment of up to 41″ tires with only 3″ of suspension lift*. The Ram HD trucks benefit immensely from a larger tire footprint and this kit is just the ticket, providing all the benefits of a large tire off-road, while maintaining a low center of gravity for safety and optimized handling on the road. The AEV Highmark Fender Flare Kit is designed to work together perfectly with AEV’s 17×10 Katla Wheel, Premium Front Bumper and 3” DualSport SC Suspension System.
The Highmark Flare construction is extremely unique, in fact the only vehicle that uses a similar construction is the Mercedes Unimog, and even at that, the AEV kit uses a much stronger version. While most aftermarket flares are simply a thin single sheet of vacuum formed plastic, AEV chose to use rotomolded polyethylene (similar to a whitewater kayak) for the ultimate in strength. This kit simply can’t be compared to anything else currently found in the aftermarket. These flares are a fully enclosed, ¼” thick highly durable part that provides approximately 4.5” of additional coverage per side.
Designed and manufactured using OE-level processes, the Highmark Fender Flare Kit gives your truck aggressive styling and an imposing stance with a factory fit and finish that are second to none. Tested and verified to function correctly between -40F and 140F, these flares won’t let you down. Additionally, the AEV Highmark Fender Flare Kit complies with US DOT passenger vehicle width regulations and includes auxiliary front and rear LED marker lights. Optional AEV Rear Splash Guards are also available to comply with state and local regulations.
AEV Highmark Fender Flares are proudly made in the USA and are available as a complete kit or a standalone front set intended for customers who are using a utility body, cab chassis, custom bed or camper configurations.
*Please note: The AEV Highmark Fender Flare Kit was designed and engineered to be used in conjunction with AEV’s Premium Front Bumper, 3” DualSport Suspension System and 17×10 Katla Wheels. For that reason, AEV cannot guarantee tire clearance and compatibility when used with other manufacturers’ front bumpers, wheels and/or suspension systems and steering components. Professional installation is highly recommended. Some steering stop adjustment may be required depending on tire and wheel choice. Customers who currently own an AEV Front Bumper, AEV Suspension System or 17×8.5 AEV Wheels will need to upgrade these components before installing our HighMark Fender Flare System. These necessary 37″ to 40″ Conversion Parts can be purchased online or by contacting our sales department directly at (248) 926-0256.
The AEV HighMark Fender Flares are designed for trucks with a 6.5′ bed. Please call us if you have an 8′ bed.
AEV’s HighMark Fender Flare kit is now available for 5th Generation HD Ram trucks! This innovative, cut-out style Fender Flare Kit is designed to allow the fitment of up to 41″ tires with only 3″ of suspension lift* on your 2019+ HD Ram 2500/3500. These heavy trucks benefit immensely from a larger tire footprint and this kit is just the ticket, providing all the benefits of a large tire off-road, while maintaining a low center of gravity for safety and optimized handling on the road. This kit also includes all the other details necessary to finish the job professionally, including new wheel liners and structural steel reinforcements.
Designed, tested and manufactured using OE-level processes, the Highmark Fender Flare Kit gives your truck aggressive styling and an imposing stance with a fit and finish that are second to none. Additionally, the AEV Highmark Fender Flare Kit complies with US DOT passenger vehicle width regulations and includes auxiliary front and rear LED marker lights. Optional AEV Rear Splash Guards are also available to comply with state and local regulations.
NOTE: Installation of the Front Highmark Fender Flares requires the use of Mopar bedside support rods. Check to see if your vehicle is equipped with these rods before starting installation. Many trucks do have these from the factory but if your vehicle does not, you will need to purchase Mopar part numbers: 68196934AA & 68196935AA from your local dealership.
Please note: The AEV Highmark Fender Flare Kit was designed and engineered to be used in conjunction with AEV’s 3” DualSport RT Suspension System, Front Bumper (w/ Short Corners) and 17×10 Katla Wheels. For that reason, AEV cannot guarantee tire clearance and compatibility when used with other manufacturers’ front bumpers, wheels and/or suspension systems and steering components. Professional installation is highly recommended. Some steering stop adjustment may be required depending on tire and wheel choice.
AEV’s Splash Guards for 2010-18 HD & 2009-18 1500 Ram Trucks are designed to comply with state and local regulations regarding tire coverage as well as offer an increased level of protection from stones, mud and road debris. These heavy duty, flexible rubber Splash Guards are vehicle specific and compatible with Ram trucks equipped with the factory fender flares as well as trucks that are outfitted with AEV’s Highmark Fender Flare Kit.
Please note: Only the Rear Splash Guards feature an AEV Bison Logo. These Splash Guards are not designed for use with aftermarket fender flares. The Rear Splash Guards for Highmark Flares may require exhaust modification.
AEV’s Vertical Tire Mount is a vehicle specific solution for securing your full-size spare in the bed of your Jeep Gladiator, HD Ram truck or Colorado. Each Vertical Tire Mount is fully adjustable to accommodate a range of tire sizes and features a robust tubular steel frame that securely attaches to both your truck’s forwardmost bed rail and the floor of the bed to safely hold your oversized wheel and tire in place, even on the roughest off-road terrain. AEV’s maximum recommended tire sizes for each application are as follows:
2019+ Jeep Gladiator: up to 42×14.502003+ HD Ram: up to 42×14.502017+ Colorado: up to 37×13.50
Careful attention was also paid to ensure that the overall height of the mount and tire would be compatible with the installation of most aftermarket toppers. AEV’s Vertical Tire Mount also features additional provisions for accessories such as a sand flag or CB antenna, as well as a convenient spot to hold a shovel. E-coated and powder coated for maximum protection against the elements and proudly made in the USA.
Please note: If you are using an aftermarket wheel with a hub bore larger than 3 5/8″ with the Ram Vertical Tire Mount, we recommend also purchasing Wilco Off-road poly cone part number# UC60702.
Aluminum Roll Bar Clamp. Black Anodized Aluminum Roll bar clamp, 6061 T6 Aluminum Roll Bar Clamp for 1.5 inch roll bar and 1/2 inch routing holeDetails:
Flog Industries mud flaps are designed to protect the truck from rocks and mud while adding class. Structured with UHMW textured plastic and an aluminum (or brushed stainless) bezel, our mud flaps offer premium protection combined with classy profile giving your truck the look it deserves.Details:
LUND(R) Rhino Linings Rocker Guards avoid scratches and dings to your vehicle's paint caused by rocks and flying debris. These premium guards, made from durable Rhino lined polyurethane and are custom designed for each vehicle.
SEQUENTIAL LED DRL: The LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. Of course these also have the trademark sequential turn signal too, which can also be setup to run as a solid on/off style for those who want something a little more traditional. And if that's not enough bling for the big bucks you'll have to shell out for these bad boys! then let's just say: Bugatti. Start. Sequence. Damn.
PERFORMANCE: As far as the stock halogen headlights go, well, the output shots are worth 1000 words! .but it's no wonder why the NHTSA is always ripping on new cars & trucks for poor visibility at night. Not the case with the new Morimoto XBs for your Ram HD. Their triple Bi-LED setup produces a well-defined beam pattern with a great amount of width, intensity, and a proper distribution of light. These are much more than an aesthetic upgrade, they will illuminate the road much more effectively in both low, and high beam mode.
NOT ONLY THAT: But their optics meet & exceed all SAE, DOT, and FMVSS108 regulations when aimed properly...and that's easy to do with their integrated vertical/lateral adjusters.
PLUG-N-PLAY: As for wiring: Morimoto's Ram LED headlights are designed to work on your truck without any modifications. They will plug into the factory connectors for the stock Ram headlights and each assembly includes all necessary connectors for a plug n play install. No error codes, no flickering, hyper-flashing! ..and trust us: that is NOT easy on a Ram. They will work on trucks with OE halogen and OE Reflector LED headlights.
WELL-BUILT: Their UV-coated polycarbonate lens will resist the test of time, ensuring your truck's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade LED chips that produce the light.
WE'VE SEEN IT ALL: and their fit, finish, performance, and warranty is far superior to everything else out there. Plus who doesn't love triple Bi-LED projectors, sequential turn signals, and a Bugatti start up sequence? With these things, there's no doubt you'll be ballin' while you're haulin'.
The company designs, manufactures and markets a full line of off-road equipment and accessories that enhance the performance of four-wheel-drive vehicles, ATV's and utility vehicles. The company's Industrial Division markets electric and hydraulic winches and hoists to commercial, industrial and severe duty customers.
Keep contaminants from getting in the fuel tank of your 2013-2018 Ram 6.7L Cummins and 2014-2018 Ram 3.0L EcoDiesel Pickup with the XDP Anodized Billet Aluminum Dodge Fuel Fill Cap XD197.
RAM's engineers decided to do away with the fuel filler cap on the late model trucks, claiming that the fuel door and gasket on the inside of the filler neck are more than enough to keep dirt, moisture, and debris from entering the tank. The XDP Anodized Billet Aluminum Dodge Fuel Fill Cap provides a simple solution to this issue of the missing cap. Built from billet aluminum, the XDP Fuel Fill Cap includes a dual o-ring seal for an easy push-in installation while also keeping your tank free from debris and contamination.
Each Fuel Fill Cap comes with an anodized black finish for styling and durability, and has a built-in magnet so it can stick to your fuel door while filling up. This is a perfect add-on for RAM owners looking to place a cap on this claim and put their minds at ease. Features:
Warranty Info:Products manufactured by XDP carry a 1-Year warranty against defects in materials and craftsmanship. The Warranty is Limited to one (1) year from the date of sale and limited solely to the parts contained within the product's kit.
CALIFORNIA WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov