Our Swaybar is a softer rate than the stock unit, allowing the axle to move more independently side to side. This smooths out off camber bumps, pot holes, and even simply turning into a drive way. Includes Sway bar, Frame mounts and End links, and hardware.
- Uses no solid joints like Heim joints or solid bushings. In this application, Heims can become noisy very early in the life-cycle, with the swaybar moving so much.
- 6 grease zerk fittings used throughout the assembly.
- Same proven JKS Poly orbital joints as used in our other swaybar links.
- Not recommended if you have a much higher center of gravity, for example, a slide in camper. If you have heavy weight in the bed below the top rail, on the trailer hitch, or towing a heavy 5th wheel or gooseneck, there is no handling issue.
- May interfere with some steering box braces, check the brace to make sure a straight bar will clear.
