DECKED | 2001-2023 FORD F150 / F250 / F350 / RAPTOR TOOL BOX

DECKED | 2001-2022 FORD F150 / F250 / F350 / RAPTOR TOOL BOX

The Tool Box will work by itself or with the DECKED DF6/DF7/DS5/DS4 Drawer System.
Pricing: $899.99

Customize Your Item

- Ladder Option -
 * required
Qty:
Free Shipping!

Description

FITMENT:

  • This DECKED Tool Box fits a FORD F150/Raptor and Super Duty pickup truck with a short, standard or 8' bed manufactured from 2001 to current.
  • If you have a Ford pickup truck older than 2001, the DECKED Tool Box will most likely be compatible if your bed width is between 61.375" and 70.5" (this should be the measurement from the left inside bed rail to the right inside bed rail). If you are unsure if the DECKED Tool Box will fit in your truck, call us before placing an order so we can confirm. 866-895-3833 or email [email protected]

DOES NOT FIT: Stepside or flairside beds. They are too narrow. Does not fit the F-150 short bed (5' 6") SuperCrew Heritage made from 2001 through 2003 (2004 badged as the SuperCrew Heritage) with the Stepside / Flareside tailgate, or the 2004-2009 version. 

COMPATIBILITY WITH A GOOSENECK OR FIFTH WHEEL: It is critical that any Gooseneck or Fifth Wheel has enough clearance to accommodate the DECKED Tool Box. The Tool Box is 6" in height above the bedrails and takes up 24" in bed depth between the cabside bed wall and the edge of the Tool Box. NOTE: If your trailer swings wide while turning, make sure there is extra clearance as needed to avoid hitting the Tool Box on a tight turn.

DUAL REAR WHEEL TRUCKS: If you have a dually fender, the Tool Box is compatible, but the access ladder may or may not be compatible. If the measurement from the cab to the start of the dually fender is 24" or less, the ladder won't have room to deploy properly.

ALL TOOL BOXES COME STANDARD WITH THE FOLLOWING: Set of (2) keys for drivers side lock, (1) Blue DECKED D-Box, and (1) Snack Tray included at no extra charge. The Tool Box with the integrated Access Ladder fits one nested D-Box and one Snack Tray. Without the Access Ladder, it will fit 2 of each. Fits up to 3 Crossboxes at the bottom of the tub. 

 

FEATURES:

  • Optional Ladder
  • Torsion Springs
  • Tied Downs
  • Waterproof
  • Lock And Key
  • D-Box Included
  • Snack Tray Included

 

COMPATIBILITY WITH DECKED DRAWER SYSTEM:

The DECKED Drawer System is NOT COMPATIBLE with the DECKED Tool Box for any short 5'6" or standard 6'6" bed length trucks.

...But it is compatible with select 8 foot Drawer Systems. This combination provides an excellent solution to the 19"-20" of remaining space cabside that exists with 8 foot Drawer System integrations.

The Tool Box is compatible with the following DECKED Drawer System 8 foot SKU's for FORD 8 foot trucks:

DRAWER SKU: MODEL: YEAR: LENGTH:
DF6 FORD F150 (purchased after 1/5/21) 2004-2014 8' bed
DF7 FORD F150 Aluminum 2015-current 8' bed
DS5 FORD Super Duty 1999-2016 8' bed
DS4 FORD Super Duty 2017-current

8' Bed

 
SPECIFICATIONS
 
WEIGHT:
  • 114lbs with ladder 
  • 103lbs without ladder.

MATERIALS:

  • Lid is steel reinforced injection molded high-impact polymer resin.
  • Base is an injection molded, impact treated high density polyethylene. 
  • Hardware is anti-corrosion treated steel and aluminum.

STORAGE & PAYLOAD:

  • 9.82 FT3
  • 73.4 Gallons
  • 500lb Dynamic Payload

INTERNAL DIMENSIONS:

  • Width Of Seal: 17.9"
  • Width Of Ladder Verts: 13.5"
  • Internal Length: 60"
  • Depth: 17.4"

**NOTE: If you purchased a DF6 Drawer System (Ford F150 8 Foot 2004-2014) before 1/5/21, it is compatible with some customization of the cabside ammo cans.

 

Prop-65

https://www.p65warnings.ca.gov/

DECKED 101

DECKED TOOL BOX LADDER WARNING

DECKED TOOL BOX LADDER WARNING:
FAILURE TO READ AND FOLLOW INSTRUCTIONS ON THIS LADDER MAY RESULT IN PERSONAL INJURY OR DAMAGE TO THE VEHICLE. FOR YOUR SAFETY, READ THE FOLLOWING CAREFULLY:
MEDIUM DUTY LADDER. MAX HEIGHT OF BEDRAIL COMPATIBILITY IS 60 INCHES.

A). INSPECTION:

1. Inspect upon receipt and before each use, never climb or use a damaged, bent or broken ladder. All parts must be in good working order. If not, contact DECKED immediately: 208-806-0251 | [email protected]

2. Make sure all bolts, rivets and joints are tight, the feet, steps and rungs are secure and ladder is functioning properly with each use.

3. Keep ladder clean, free from grease, oil, mud, snow, wet paint, and other slippery material.

4. Never make repairs on damaged or missing parts. Contact us immediately: 208-806-0251 | [email protected]

B). PROPER SET-UP AND DEPLOYMENT:

1. Make sure ladder is fully deployed with the bottom two rungs securely clicked into place. IF LADDER IS NOT FULLY DEPLOYED, LADDER COULD SWING INTO THE VEHICLE AND CAUSE DAMAGE TO THE VEHICLE.

2. DO NOT DEPLOY OR USE AS A BRACE, PLATFORM OR PLANK.

3. DO NOT DEPLOY INTO TRAFFIC.

4. DANGER! METAL CONDUCTS ELECTRICITY! Do not use ladder if any material comes in contact with live electrical wires.

5. Make sure fully deployed ladder is placed on firm, level ground surface before use. Secure footing. Do not place on grease, oil or any slippery surfaces. Do not place on boxes, unstable bases or scaffolds to gain additional height. Do not place in front of anything opening toward ladder.

6. Erect ladder as vertical as possible.

C). PROPER CLIMBING AND USE:

1. Before climbing double check the following: a). ladder is fully deployed with the bottom two rungs securely clicked into place. b). horizontal bars are resting flat on the tool box lip. c). ladder is grounded as vertical as possible.

2. Grab DECKED Tool Box Lid handle for stability when climbing ladder.

3. Avoid pinch points.

4. Face ladder when climbing up or down. Keep body centered between rails. Maintain 3 points of contact.

5. Wear slip resistant footwear.

6. To protect children, do not leave ladder deployed and unattended while children are present.

7. DO NOT USE LADDER if you tire easily, are subject to fainting spells, are using medication, are under the influence of drugs or alcohol, or are physically impaired.

8. One user on ladder at a time.

D). PROPER CARE AND STORAGE:

1. Properly secure and stow ladder while in transit with DECKED Tool Box lid securely closed.

2. Keep ladder clean and free of foreign materials.

3. Never store materials on ladder.

4. To protect children, do not leave ladder deployed and unattended while children are present.

Details

Categories

Shipping Information

  • Item Requires Shipping
  • Free Shipping!

Documents

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.