Jeep Gladiator JT Dual Battery DIY Kit 2020-2022 Jeep Gladiator JT.
For the do-it-yourself guys, we now offer our high quality battery tray as a stand alone kit. If you would like to use your own battery isolator and do the wiring yourself, or if you have specific needs that our full-featured kit does not meet, now you can get the bare battery tray and top lid alone. This kit comes with no components mounted onto the top lid, but you still get all the hardware you need to install it into your 2020+ Jeep Gladiator JT.
The kit includes everything you need to install the tray:
- Fits 2020+ Jeep Gladiator
- Batteries sold separately. Matching Group 25 batteries are required.
- CNC laser cut and CNC bent steel battery tray
- Top lid with grommets for routing your wires
- Rubber caps over the pressed-in studs - you can use them or remove them
- Hardware to secure the top lid
- Uses the factory battery cables - no cutting required
- Heavy duty battery tray spreads the weight of the batteries over a larger area
- Powder coated for durability
- Proudly made in the USA
- Sold As A Kit
Follow our detailed instructions for installing the battery tray, then finish it off with your own custom wiring solution.
Battery Options:
- Any Group 25 size battery will fit our tray (Note the stock battery is not compatible)
- For your convenience, we currently offer the Full River FT750-25, an excellent battery that has 750CCA (cold cranking amps) and 64aH (amp hours) of reserve capacity
- Note: Batteries ordered through Genesis Offroad will ship separately
- Both batteries must be the same physical size for the top lid to securely hold them in place
Optional G Screen Monitoring System
- Voltage levels for each battery
- Remote status indicator
- Background color changes based on battery status
- Remote boost button
- Completely pre-wired for you!
- Multiple mounting options (A pillar, dash, or in an sPod over the rear view mirror)
- Order with your battery kit to combine shipping
Optional ring terminals
Are you planning on connecting some accessories to the power & ground bus bars? We offer this convenient 10-pack of high quality, adhesive-lined heat shrink ring terminals. These are much better quality than the cheap ring terminals at the auto parts stores. Used with 16-14ga wire - the most common size for low amperage accessories like LED lights, CB, etc. Add a pack to your order from the options above.
Jeep Gladiator JT Dual Battery DIY Kit 2020-2022 Jeep Gladiator JT.
For the do-it-yourself guys, we now offer our high quality battery tray as a stand alone kit. If you would like to use your own battery isolator and do the wiring yourself, or if you have specific needs that our full-featured kit does not meet, now you can get the bare battery tray and top lid alone. This kit comes with no components mounted onto the top lid, but you still get all the hardware you need to install it into your 2020+ Jeep Gladiator JT.
The kit includes everything you need to install the tray:
- Fits 2020+ Jeep Gladiator
- Batteries sold separately. Matching Group 25 batteries are required.
- CNC laser cut and CNC bent steel battery tray
- Top lid with grommets for routing your wires
- Rubber caps over the pressed-in studs - you can use them or remove them
- Hardware to secure the top lid
- Uses the factory battery cables - no cutting required
- Heavy duty battery tray spreads the weight of the batteries over a larger area
- Powder coated for durability
- Proudly made in the USA
- Sold As A Kit
Follow our detailed instructions for installing the battery tray, then finish it off with your own custom wiring solution.
Battery Options:
- Any Group 25 size battery will fit our tray (Note the stock battery is not compatible)
- For your convenience, we currently offer the Full River FT750-25, an excellent battery that has 750CCA (cold cranking amps) and 64aH (amp hours) of reserve capacity
- Note: Batteries ordered through Genesis Offroad will ship separately
- Both batteries must be the same physical size for the top lid to securely hold them in place
Optional G Screen Monitoring System
- Voltage levels for each battery
- Remote status indicator
- Background color changes based on battery status
- Remote boost button
- Completely pre-wired for you!
- Multiple mounting options (A pillar, dash, or in an sPod over the rear view mirror)
- Order with your battery kit to combine shipping
Optional ring terminals
Are you planning on connecting some accessories to the power & ground bus bars? We offer this convenient 10-pack of high quality, adhesive-lined heat shrink ring terminals. These are much better quality than the cheap ring terminals at the auto parts stores. Used with 16-14ga wire - the most common size for low amperage accessories like LED lights, CB, etc. Add a pack to your order from the options above.
