SKU: CS-BRBMPR-21-F
– Cold Rolled USA Steel Construction
– Internal Gussets for Optimal Strength
– Seamless Integration of Baja Designs Lighting
Includes Wiring Harness for that above lights
– Seamless Integration of Factory Parking Sensors
– Fits up to 12K Warn (VR Series) Winch (NOT Included)
– NOT Compatible with ACC (requires relocation)
– 100 lbs, Ensures Minimal Weight Addition
– Fitment: 2021-2023 Ford Bronco 4×4
HIGHLIGHTS
- 100% USA MADE: Construction is 3/16″ Cold rolled US Steel in the center section, 1/8″ on the wings.
- Modular design ensures ease of shipping; not designed to run only the center section. This whole bumper fits into a 43″ x 25″ x 15″ Box weighing in at 105 lbs. with all brackets and hardware.
- Weight: This bumper clocks in at 100 lbs on the nose with all parts needed to install (sans lighting and winch) ensuring it has minimal impact on your front suspension height.
- Satin Black Powder Coat for finish longevity with a Stainless Carli Logo Plate.
- Accommodates factory parking sensors; for those without parking sensors, the bumper will come with amber lights that are a direct fit into the sensor holes.
- Internal wiring Channel with pre-drilled holes for zip ties to ensure easy, clean wiring if factory parking sensor and light harnesses.
- The bottom of the bumper has a channel to ensure proper airflow to the intercooler.
- D-Ring recovery points that are integrated into the bumper’s structure.
- Sleek profile with a center section built to accommodate up to a Warn VR EVO 12-S Winch (Installed in pictures below is the Warn XEON 10-S) *Winch NOT Included*
- More clearance for the factory front camera than any bumper on the market with the winch installed.
- Designed to integrate Baja Designs XL80 PRO in forward-facing cutouts and S2 diffused in the bumper side/rock light. *Lights NOT Included*
- Seamless integration to the Carli Skid Plate
- **Carli will not offer provisions for the ACC – there are several kits on the market that effectively relocate this module, any one of them can be paired with our bumper. If equipped, this module WILL require relocation.**
SKU: CS-BRBMPR-21-F
– Cold Rolled USA Steel Construction
– Internal Gussets for Optimal Strength
– Seamless Integration of Baja Designs Lighting
Includes Wiring Harness for that above lights
– Seamless Integration of Factory Parking Sensors
– Fits up to 12K Warn (VR Series) Winch (NOT Included)
– NOT Compatible with ACC (requires relocation)
– 100 lbs, Ensures Minimal Weight Addition
– Fitment: 2021-2023 Ford Bronco 4×4
HIGHLIGHTS
- 100% USA MADE: Construction is 3/16″ Cold rolled US Steel in the center section, 1/8″ on the wings.
- Modular design ensures ease of shipping; not designed to run only the center section. This whole bumper fits into a 43″ x 25″ x 15″ Box weighing in at 105 lbs. with all brackets and hardware.
- Weight: This bumper clocks in at 100 lbs on the nose with all parts needed to install (sans lighting and winch) ensuring it has minimal impact on your front suspension height.
- Satin Black Powder Coat for finish longevity with a Stainless Carli Logo Plate.
- Accommodates factory parking sensors; for those without parking sensors, the bumper will come with amber lights that are a direct fit into the sensor holes.
- Internal wiring Channel with pre-drilled holes for zip ties to ensure easy, clean wiring if factory parking sensor and light harnesses.
- The bottom of the bumper has a channel to ensure proper airflow to the intercooler.
- D-Ring recovery points that are integrated into the bumper’s structure.
- Sleek profile with a center section built to accommodate up to a Warn VR EVO 12-S Winch (Installed in pictures below is the Warn XEON 10-S) *Winch NOT Included*
- More clearance for the factory front camera than any bumper on the market with the winch installed.
- Designed to integrate Baja Designs XL80 PRO in forward-facing cutouts and S2 diffused in the bumper side/rock light. *Lights NOT Included*
- Seamless integration to the Carli Skid Plate
- **Carli will not offer provisions for the ACC – there are several kits on the market that effectively relocate this module, any one of them can be paired with our bumper. If equipped, this module WILL require relocation.**
