Beans Diesel/Bean Machine has stepped up the tank sump another notch. Made from 6061 Billet aluminum, this guy is built like a tank and is super simple to install. Just like their original and revolutionary design, install is as easy as it gets, requiring a single 3" hole and a single bolt. This means super easy and quick install time as well as minimal places to develop a leak.
All of their tank sumps come with a 3" hole saw, (so no extra trips to the hardware store), as well as all stainless or aluminum hardware. The single O-ring design creates the perfect seal insuring you have zero leaks. They manufacture the only tank sump on the market that uses O-ring Boss style fittings instead of a pipe thread style fitting. This means less possibility for leaks and a perfect seal. The fittings can be used with a quick disconnect fitting (found on many aftermarket fuel systems) or 1/2" push-lock style fuel hose. That means it is going to be plug and play for the largest percentage of aftermarket fuel systems out there! Beans even includes a plug if you only need a single outlet style sump.
Beans Diesel are not the only sump manufacture on the market, but if you do purchase a Beans sump, you will be purchasing a 100% USA manufactured product from the company that invented the single hole design sump!
Functions:
- Supply/Return
- Single outlet setup
- For your higher horse power trucks, dual outlet to get the extra fuel needed.
Features:
- Uses all available fuel from the tank. No issues with sucking air when below 1/8th of a tank. Perfect for use with today's high flow lift pump systems. (Airdog, FASS, etc)
- Sediment bowl area machined inside of the sump to reduce the amount of sediments that get to your filter system.
- Stainless Drain Plug for future tank servicing or sediment draining.
- Single bolt design that allows for 5 minute install. A single bolt offers less chances for leaks than tanks sumps using multiple bolts drilled into the tank.
- Stainless Steel hardware, High Flow aluminum Quick Disconnect/pushlock fittings, and a -8 ORB Plug are provided in the kit.
- Comes with 3” hole saw to make the only hole needed in your tank for install.
- Inner ring designed to go through the 3” hole so tank does not need to be dropped.
- O-ring design for a perfect seal.
- Super strong 1 piece machined billet design.
- Can be installed on any fuel tank with an available 4” diameter flat area
- Supporting the Company that Invented the Single Hole Design Sump!
- DESIGNED AND MANUFACTURED AT OUR FACILITY, IN WOODBURY, TN USA!!!
Kit Includes:
- Sump Body
- Sump "Pacman" in Tank Backer Ring
- 3" Hole Saw
- Stainless Steel Bolt
- Sealing Washer
- O-Ring
- (2) -8 O-Ring Boss (ORB) to 1/2" QDC/Push-lock Fittings (With O-Ring)
- (1) -8 O-Ring Boss (ORB) Plug For Single Outlet Operation (With O-Ring)
- 1/4" NPT Stainless Steel Drain Plug Plug Fitting
**If you are running a FASS Fuel System that with 5/8" fuel line, you must purchase the Beans Diesel -8 ORB to 5/8" Push-Lock Fitting.**
Beans Diesel/Bean Machine has stepped up the tank sump another notch. Made from 6061 Billet aluminum, this guy is built like a tank and is super simple to install. Just like their original and revolutionary design, install is as easy as it gets, requiring a single 3" hole and a single bolt. This means super easy and quick install time as well as minimal places to develop a leak.
All of their tank sumps come with a 3" hole saw, (so no extra trips to the hardware store), as well as all stainless or aluminum hardware. The single O-ring design creates the perfect seal insuring you have zero leaks. They manufacture the only tank sump on the market that uses O-ring Boss style fittings instead of a pipe thread style fitting. This means less possibility for leaks and a perfect seal. The fittings can be used with a quick disconnect fitting (found on many aftermarket fuel systems) or 1/2" push-lock style fuel hose. That means it is going to be plug and play for the largest percentage of aftermarket fuel systems out there! Beans even includes a plug if you only need a single outlet style sump.
Beans Diesel are not the only sump manufacture on the market, but if you do purchase a Beans sump, you will be purchasing a 100% USA manufactured product from the company that invented the single hole design sump!
Functions:
- Supply/Return
- Single outlet setup
- For your higher horse power trucks, dual outlet to get the extra fuel needed.
Features:
- Uses all available fuel from the tank. No issues with sucking air when below 1/8th of a tank. Perfect for use with today's high flow lift pump systems. (Airdog, FASS, etc)
- Sediment bowl area machined inside of the sump to reduce the amount of sediments that get to your filter system.
- Stainless Drain Plug for future tank servicing or sediment draining.
- Single bolt design that allows for 5 minute install. A single bolt offers less chances for leaks than tanks sumps using multiple bolts drilled into the tank.
- Stainless Steel hardware, High Flow aluminum Quick Disconnect/pushlock fittings, and a -8 ORB Plug are provided in the kit.
- Comes with 3” hole saw to make the only hole needed in your tank for install.
- Inner ring designed to go through the 3” hole so tank does not need to be dropped.
- O-ring design for a perfect seal.
- Super strong 1 piece machined billet design.
- Can be installed on any fuel tank with an available 4” diameter flat area
- Supporting the Company that Invented the Single Hole Design Sump!
- DESIGNED AND MANUFACTURED AT OUR FACILITY, IN WOODBURY, TN USA!!!
Kit Includes:
- Sump Body
- Sump "Pacman" in Tank Backer Ring
- 3" Hole Saw
- Stainless Steel Bolt
- Sealing Washer
- O-Ring
- (2) -8 O-Ring Boss (ORB) to 1/2" QDC/Push-lock Fittings (With O-Ring)
- (1) -8 O-Ring Boss (ORB) Plug For Single Outlet Operation (With O-Ring)
- 1/4" NPT Stainless Steel Drain Plug Plug Fitting
**If you are running a FASS Fuel System that with 5/8" fuel line, you must purchase the Beans Diesel -8 ORB to 5/8" Push-Lock Fitting.**
