Avoid catastrophic engine failure from a sheared dowel pin in your 2001-2016 GM 6.6L Duramax with the XDP Duramax Crankshaft Pin Kit XD331. From the factory, your Duramax uses a dowel pin on the crankshaft to hold the balancer in place. In both stock and performance applications, these dowel pins are easily sheared causing the balancer to spin on the snout of the crankshaft. When this balancer spins, it can throw off the balance of the engine and create harsh vibrations. Continued operation in these conditions will likely result in serious engine damage such as a broken crankshaft.
Eliminate the risks of engine damage and pin your crankshaft so the balancer stays in place with the XDP Duramax Crankshaft Pin Kit XD331. The Crankshaft Pin Kit includes a specially made jig so you so you can drill the crankshaft without requiring an engine tear-down, or a machine shop. Perfect for the toolbox of the at-home Duramax enthusiast, or a professional shop tech. The included drill bit allows for around 5 procedures to be performed before requiring a replacement. Each kit includes a jig, jig holding bolt, drill bit, pin, and installation instructions.
Features:
Engine Tear-Down Not Required
Eliminates Factory Dowel Pin Failures
NOTE: If using PPE, ATI, or a Super Damper, the counter weight must be removed before installing drill collar.
Product Details
Avoid catastrophic engine failure from a sheared dowel pin in your 2001-2016 GM 6.6L Duramax with the XDP Duramax Crankshaft Pin Kit XD331. From the factory, your Duramax uses a dowel pin on the crankshaft to hold the balancer in place. In both stock and performance applications, these dowel pins are easily sheared causing the balancer to spin on the snout of the crankshaft. When this balancer spins, it can throw off the balance of the engine and create harsh vibrations. Continued operation in these conditions will likely result in serious engine damage such as a broken crankshaft.
Eliminate the risks of engine damage and pin your crankshaft so the balancer stays in place with the XDP Duramax Crankshaft Pin Kit XD331. The Crankshaft Pin Kit includes a specially made jig so you so you can drill the crankshaft without requiring an engine tear-down, or a machine shop. Perfect for the toolbox of the at-home Duramax enthusiast, or a professional shop tech. The included drill bit allows for around 5 procedures to be performed before requiring a replacement. Each kit includes a jig, jig holding bolt, drill bit, pin, and installation instructions.
Features:
Engine Tear-Down Not Required
Eliminates Factory Dowel Pin Failures
NOTE: If using PPE, ATI, or a Super Damper, the counter weight must be removed before installing drill collar.
The XDP Rocker Arm Shafts XD385 are specially designed to minimize the common oiling issues in the 2001-2019 GM 6.6L Duramax engines. From the factory, the oil supply to the rocker arm is shut off ...
Put the XDP Billet Coolant Block-Off Plate XD344 in your 2011-2017 GM 6.6L Duramax to permanently eliminate coolant leaks from the rear housing on your LML and L5P engine. The factory cover uses a ...
The XDP Billet Rocker Arm Valve Bridge Set XD384 will greatly improve the factory valvetrain in your modified 2001-2016 GM 6.6L Duramax. The OE rocker arm bridges in your valvetrain were designed f...
Replace the exhaust manifold in your 2001-2016 GM 6.6L Duramax with the XDP Driver Side High-Flow Exhaust Manifold XD342. The XD342 has an unrestricted high-flow design that eliminates the dented o...
Subscribe To Our Newsletter
Promotions, New Products And Sales. Directly To Your Inbox.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
