This kit features additional clearance, and an extra zip tie mount hole, providing flexibility for securing nearby hoses and harnesses.
For less than the price of one tank of fuel, you can protect your truck from thousands of dollars of damage!
It's no secret that the heavy duty Rams are prone to catastrophic front driveshaft failures.
These failures typically occur at the double cardan joint on the upper end of the shaft, next to the transfer case.
After the driveshaft or transfer case breaks free, the loose driveshaft is likely to come through the cab floor, and/or rupture nearby fuel/brake/transmission lines, causing fire in some cases.
This driveshaft loop will not prevent driveshaft failures but will protect from secondary damage in the event of a failure.
It is still recommended to grease and inspect your driveshaft frequently.
This kit features laser cut, powder coated 1/4" plate steel construction, includes instructions, and all necessary high-tensile hardware.
Note: 2019 and up Chassis Cab Trucks have Center Axle Disconnect (CAD), and the front driveshaft isn't "driven" unless 4WD is engaged, or the CAD system is malfunctioning. We believe the driveshaft loop is still a good idea, especially if you spend a lot of time in 4 wheel drive.
These DO NOT fit 2014-2024 3500 Chassis Cab trucks. Kits for these trucks are in development.
- No Drilling Required!
- Made in the USA!
This kit features additional clearance, and an extra zip tie mount hole, providing flexibility for securing nearby hoses and harnesses.
For less than the price of one tank of fuel, you can protect your truck from thousands of dollars of damage!
It's no secret that the heavy duty Rams are prone to catastrophic front driveshaft failures.
These failures typically occur at the double cardan joint on the upper end of the shaft, next to the transfer case.
After the driveshaft or transfer case breaks free, the loose driveshaft is likely to come through the cab floor, and/or rupture nearby fuel/brake/transmission lines, causing fire in some cases.
This driveshaft loop will not prevent driveshaft failures but will protect from secondary damage in the event of a failure.
It is still recommended to grease and inspect your driveshaft frequently.
This kit features laser cut, powder coated 1/4" plate steel construction, includes instructions, and all necessary high-tensile hardware.
Note: 2019 and up Chassis Cab Trucks have Center Axle Disconnect (CAD), and the front driveshaft isn't "driven" unless 4WD is engaged, or the CAD system is malfunctioning. We believe the driveshaft loop is still a good idea, especially if you spend a lot of time in 4 wheel drive.
These DO NOT fit 2014-2024 3500 Chassis Cab trucks. Kits for these trucks are in development.
- No Drilling Required!
- Made in the USA!
