AEV’s HighMark Fender Flare kit is now available for 5th Generation HD Ram trucks! This innovative, cut-out style Fender Flare Kit is designed to allow the fitment of up to 41″ tires with only 3″ of suspension lift* on your 2019+ HD Ram 2500/3500. These heavy trucks benefit immensely from a larger tire footprint and this kit is just the ticket, providing all the benefits of a large tire off-road, while maintaining a low center of gravity for safety and optimized handling on the road. This kit also includes all the other details necessary to finish the job professionally, including new wheel liners and structural steel reinforcements.
The construction of the HighMark Fender Flares for 2019+ RAM 2500/3500 is extremely unique, in fact the only vehicle that uses a similar construction is the Mercedes Unimog, and even at that, the AEV kit uses a much stronger version. While most aftermarket flares are simply a thin single sheet of vacuum formed plastic, AEV chose to use rotomolded polyethylene (similar to a whitewater kayak) for the ultimate in strength. This kit simply can’t be compared to anything else currently found in the aftermarket. These flares are a fully enclosed, ¼” thick highly durable part that provides approximately 4.5” of additional coverage per side.
Designed, tested and manufactured using OE-level processes, the Highmark Fender Flares for 2019+ RAM 2500/3500 give your truck aggressive styling and an imposing stance with a fit and finish that are second to none. Additionally, the AEV Highmark Fender Flare Kit complies with US DOT passenger vehicle width regulations and includes auxiliary front and rear LED marker lights. Optional AEV Rear Splash Guards are also available to comply with state and local regulations.
AEV Highmark Fender Flares for 2019+ RAM 2500/3500 are proudly made in the USA and are available as a complete kit or a standalone front set intended for customers who are using a utility body, cab chassis, custom bed or camper configurations.
NOTE: Installation of the Front Highmark Fender Flares requires the use of Mopar bedside support rods. Check to see if your vehicle is equipped with these rods before starting installation. Many trucks do have these from the factory but if your vehicle does not, you will need to purchase Mopar part numbers: 68196934AA & 68196935AA from your local dealership.
- Fits 2019+ HD Ram 2500/3500 Trucks
- Allows the fitment of a massive 41” tire with only 3” of suspension lift!
- Provides 3.5” additional tire coverage in the front and 4.5” in the rear
- Maintains a low center of gravity for optimized handling and safety
- Nearly indestructible polyethylene measuring over ¼” thick
- Custom AEV inner fender liners are included for a professional installation
- Front only sets are available for utility body, cab chassis and custom bed/camper applications
- Factory fit and finish
- Complies with US DOT regulations
- Proudly made in the USA
Please note: The AEV Highmark Fender Flare Kit was designed and engineered to be used in conjunction with AEV’s 3” DualSport RT Suspension System, Front Bumper (w/ Short Corners) and 17×10 Katla Wheels. For that reason, AEV cannot guarantee tire clearance and compatibility when used with other manufacturers’ front bumpers, wheels and/or suspension systems and steering components. Professional installation is highly recommended. Some steering stop adjustment may be required depending on tire and wheel choice.
AEV’s HighMark Fender Flare kit is now available for 5th Generation HD Ram trucks! This innovative, cut-out style Fender Flare Kit is designed to allow the fitment of up to 41″ tires with only 3″ of suspension lift* on your 2019+ HD Ram 2500/3500. These heavy trucks benefit immensely from a larger tire footprint and this kit is just the ticket, providing all the benefits of a large tire off-road, while maintaining a low center of gravity for safety and optimized handling on the road. This kit also includes all the other details necessary to finish the job professionally, including new wheel liners and structural steel reinforcements.
The construction of the HighMark Fender Flares for 2019+ RAM 2500/3500 is extremely unique, in fact the only vehicle that uses a similar construction is the Mercedes Unimog, and even at that, the AEV kit uses a much stronger version. While most aftermarket flares are simply a thin single sheet of vacuum formed plastic, AEV chose to use rotomolded polyethylene (similar to a whitewater kayak) for the ultimate in strength. This kit simply can’t be compared to anything else currently found in the aftermarket. These flares are a fully enclosed, ¼” thick highly durable part that provides approximately 4.5” of additional coverage per side.
Designed, tested and manufactured using OE-level processes, the Highmark Fender Flares for 2019+ RAM 2500/3500 give your truck aggressive styling and an imposing stance with a fit and finish that are second to none. Additionally, the AEV Highmark Fender Flare Kit complies with US DOT passenger vehicle width regulations and includes auxiliary front and rear LED marker lights. Optional AEV Rear Splash Guards are also available to comply with state and local regulations.
AEV Highmark Fender Flares for 2019+ RAM 2500/3500 are proudly made in the USA and are available as a complete kit or a standalone front set intended for customers who are using a utility body, cab chassis, custom bed or camper configurations.
NOTE: Installation of the Front Highmark Fender Flares requires the use of Mopar bedside support rods. Check to see if your vehicle is equipped with these rods before starting installation. Many trucks do have these from the factory but if your vehicle does not, you will need to purchase Mopar part numbers: 68196934AA & 68196935AA from your local dealership.
- Fits 2019+ HD Ram 2500/3500 Trucks
- Allows the fitment of a massive 41” tire with only 3” of suspension lift!
- Provides 3.5” additional tire coverage in the front and 4.5” in the rear
- Maintains a low center of gravity for optimized handling and safety
- Nearly indestructible polyethylene measuring over ¼” thick
- Custom AEV inner fender liners are included for a professional installation
- Front only sets are available for utility body, cab chassis and custom bed/camper applications
- Factory fit and finish
- Complies with US DOT regulations
- Proudly made in the USA
Please note: The AEV Highmark Fender Flare Kit was designed and engineered to be used in conjunction with AEV’s 3” DualSport RT Suspension System, Front Bumper (w/ Short Corners) and 17×10 Katla Wheels. For that reason, AEV cannot guarantee tire clearance and compatibility when used with other manufacturers’ front bumpers, wheels and/or suspension systems and steering components. Professional installation is highly recommended. Some steering stop adjustment may be required depending on tire and wheel choice.
