DDP Motorsports 2017-2026 Ford 6.7L Powerstroke Cold Side Intercooler Pipe Upgrade DDP-CSP67-1726
The factory cold side intercooler pipe on the 2017-2026 Ford 6.7L Powerstroke is one of the most common weak points in the charge air system. Although the factory plastic pipe is adequate for everyday driving, years of heat cycles, vibration, increased boost pressure, heavy towing, and aftermarket tuning can eventually cause the pipe to crack, split, or separate.
When this happens, boost pressure escapes before reaching the engine, leading to a noticeable loss of power, sluggish acceleration, poor throttle response, excessive smoke, and reduced towing performance. These failures rarely happen at a convenient time—they typically occur when the engine is working its hardest, whether towing a heavy load, climbing steep grades, or under hard acceleration.
The DDP Motorsports Cold Side Intercooler Pipe Upgrade replaces the factory plastic assembly with a heavy-duty 3-inch mandrel-bent steel pipe designed to provide significantly greater durability and long-term reliability. Whether your truck is completely stock or equipped with aftermarket tuning and performance upgrades, this direct-fit replacement helps eliminate one of the most common failure points on the 6.7L Powerstroke.
A precision CNC-machined billet adapter provides an OE-style fit at the factory intercooler connection, while reinforced multi-ply silicone couplers and heavy-duty stainless steel T-bolt clamps deliver a secure, leak-free connection capable of handling substantially higher boost pressures than the factory components.
Installation is completely bolt-on with no cutting, drilling, or aftermarket tuning required, making this an excellent upgrade for daily drivers, tow rigs, fleet vehicles, work trucks, and performance builds.
Why Upgrade Your Factory Cold Side Pipe?
The factory plastic charge pipe is constantly exposed to boost pressure, engine movement, vibration, and extreme temperature changes. Over time, these conditions weaken the plastic until it eventually fails under load, often leaving the truck in reduced power or stranded on the side of the road.
Upgrading to a steel cold side pipe provides peace of mind by eliminating one of the most common boost leak sources on the 6.7L Powerstroke. It's a smart preventative upgrade whether you're towing every day, adding horsepower, or simply looking to improve the long-term reliability of your truck.
Features
- Fits 2017-2026 Ford 6.7L Powerstroke
- Direct replacement for the factory cold side intercooler pipe
- Heavy-duty 3-inch mandrel-bent steel construction
- Eliminates the factory plastic failure point
- Precision CNC-machined black anodized billet adapter
- Reinforced multi-ply silicone couplers
- Heavy-duty stainless steel T-bolt clamps
- Direct bolt-on installation
- No cutting or modifications required
- No aftermarket tuning required
Specifications
- Part Number: DDP-CSP67-1726
- Application: 2017-2026 Ford 6.7L Powerstroke
- Pipe Material: Mandrel-bent steel
- Pipe Diameter: 3 Inches
- Adapter Material: CNC-machined billet aluminum
- Couplers: Reinforced multi-ply silicone
- Clamps: Stainless steel T-bolt clamps
Ideal For
- Daily drivers
- Heavy towing
- Fleet trucks
- Work trucks
- Tuned trucks
- High-horsepower builds
- Preventative maintenance upgrades
DDP Motorsports 2017-2026 Ford 6.7L Powerstroke Cold Side Intercooler Pipe Upgrade DDP-CSP67-1726
The factory cold side intercooler pipe on the 2017-2026 Ford 6.7L Powerstroke is one of the most common weak points in the charge air system. Although the factory plastic pipe is adequate for everyday driving, years of heat cycles, vibration, increased boost pressure, heavy towing, and aftermarket tuning can eventually cause the pipe to crack, split, or separate.
When this happens, boost pressure escapes before reaching the engine, leading to a noticeable loss of power, sluggish acceleration, poor throttle response, excessive smoke, and reduced towing performance. These failures rarely happen at a convenient time—they typically occur when the engine is working its hardest, whether towing a heavy load, climbing steep grades, or under hard acceleration.
The DDP Motorsports Cold Side Intercooler Pipe Upgrade replaces the factory plastic assembly with a heavy-duty 3-inch mandrel-bent steel pipe designed to provide significantly greater durability and long-term reliability. Whether your truck is completely stock or equipped with aftermarket tuning and performance upgrades, this direct-fit replacement helps eliminate one of the most common failure points on the 6.7L Powerstroke.
A precision CNC-machined billet adapter provides an OE-style fit at the factory intercooler connection, while reinforced multi-ply silicone couplers and heavy-duty stainless steel T-bolt clamps deliver a secure, leak-free connection capable of handling substantially higher boost pressures than the factory components.
Installation is completely bolt-on with no cutting, drilling, or aftermarket tuning required, making this an excellent upgrade for daily drivers, tow rigs, fleet vehicles, work trucks, and performance builds.
Why Upgrade Your Factory Cold Side Pipe?
The factory plastic charge pipe is constantly exposed to boost pressure, engine movement, vibration, and extreme temperature changes. Over time, these conditions weaken the plastic until it eventually fails under load, often leaving the truck in reduced power or stranded on the side of the road.
Upgrading to a steel cold side pipe provides peace of mind by eliminating one of the most common boost leak sources on the 6.7L Powerstroke. It's a smart preventative upgrade whether you're towing every day, adding horsepower, or simply looking to improve the long-term reliability of your truck.
Features
- Fits 2017-2026 Ford 6.7L Powerstroke
- Direct replacement for the factory cold side intercooler pipe
- Heavy-duty 3-inch mandrel-bent steel construction
- Eliminates the factory plastic failure point
- Precision CNC-machined black anodized billet adapter
- Reinforced multi-ply silicone couplers
- Heavy-duty stainless steel T-bolt clamps
- Direct bolt-on installation
- No cutting or modifications required
- No aftermarket tuning required
Specifications
- Part Number: DDP-CSP67-1726
- Application: 2017-2026 Ford 6.7L Powerstroke
- Pipe Material: Mandrel-bent steel
- Pipe Diameter: 3 Inches
- Adapter Material: CNC-machined billet aluminum
- Couplers: Reinforced multi-ply silicone
- Clamps: Stainless steel T-bolt clamps
Ideal For
- Daily drivers
- Heavy towing
- Fleet trucks
- Work trucks
- Tuned trucks
- High-horsepower builds
- Preventative maintenance upgrades
