Decked | 2001-2024 GMC Sierra 1500-3500 Tool Box

FITMENT:

• This DECKED Tool Box fits a GMC Sierra 1500/2500/2500 pickup truck with a short, standard or 8' bed manufactured from 2001 to current. Make sure to select WITH LADDER before checkout if you want the integrated ladder. 

• If you have a Sierra older than 2001, the DECKED Tool Box will most likely be compatible if your bed width is between 61.375" and 70.5" (this should be the measurement from the left inside bed rail to the right inside bed rail). If you are unsure if the DECKED Tool Box will fit in your truck, call us before placing an order so we can confirm. 866-895-3833 or email sales@ddpmotorsports.com
• DOES NOT FIT: Stepside or flairside beds. They are too narrow. Does not fit the GMC/Chevy Sierra/Silverado stepside made from 1999-2011.
• NOTE: The DECKED Tool Box does not fit the CarbonPro Bed.

COMPATIBILITY WITH A GOOSENECK OR FIFTH WHEEL: It is critical that any Gooseneck or Fifth Wheel has enough clearance to accommodate the DECKED Tool Box. The Tool Box is 6" in height above the bedrails and takes up 24" in bed depth between the cabside bed wall and the edge of the Tool Box. NOTE: If your trailer swings wide while turning, make sure there is extra clearance as needed to avoid hitting the Tool Box on a tight turn.

DUAL REAR WHEEL TRUCKS: If you have a dually fender, the Tool Box is compatible, but the access ladder may or may not be compatible. If the measurement from the cab to the start of the dually fender is 24" or less, the ladder won't have room to deploy properly.

ALL TOOL BOXES COME STANDARD WITH THE FOLLOWING: Set of (2) keys for drivers side lock, (1) Blue DECKED D-Box, and (1) Snack Tray included at no extra charge. The Tool Box with the integrated Access Ladder fits one nested D-Box and one Snack Tray. Without the Access Ladder, it will fit 2 of each. Fits up to 3 Crossboxes at the bottom of the tub. 

FEATURES:

• Optional Ladder
• Torsion Springs
• Tied Downs
• Waterproof
• Lock And Key
• D-Box Included
• Snack Tray Included

COMPATIBILITY WITH DECKED DRAWER SYSTEM:

The DECKED Drawer System is NOT COMPATIBLE with the DECKED Tool Box for any short 5'6" or standard 6'6" bed length trucks.

...But it is compatible with select 8 foot Drawer Systems. This combination provides an excellent solution to the 19"-20" of remaining space cabside that exists with 8' Drawer System integrations.

NOTE: The Tool Box NOT COMPATIBLE with the DG5 Drawer System [Any Sierra 8' bed 2007-2018 - or - Limited edition "old body style" 2019]. The cabside gap from the Drawer System is too small to fit the Tool Box.