Chassis Unlimited “Octane Series” swing out rear tire carrier bumper ships to your door ready to install on your truck, complete with 3-Stage texture black powder coat. This is our high-clearance bed cut version, allowing extreme departure angles and bed protection. Ships fully assembled ready to install
PRODUCT SHOWN WITH CUSTOM POWDERCOAT(NOT OFFERED) WILL SHIP WITH BLACK TEXTURE POWDERCOAT ONLY
The Octane series swing out bumper is our premium rear tire carrier bumper. Double latching swingout with slam bumpers allow a vibration free swing out and an easy open/close using our push button latch system. A secondary latch on the swing out spindle also allows locking in 2 positions- closed and open, so you don’t need to worry about holding your swing outs open while lowering your tail gate. Universal ½” Slots on both swing outs allow you to mount up to a 40” Spare tire/wheel, and all your favorite accessories. One spare tire mount is included with the purchase of the bumper.
This swing out tire carrier is manufactured with top-of-the-line components ensuring our product will last a lifetime of adventures. USA Premium rated hinge/spindles with billet aluminum caps, rubber bump stops ensuring a slam style close with no vibration, push button cam style release latches, ½” Pin secondary close and open stop, Includes spare tire mount with studs.
The Octane series bumper brings an entire new style to the bumper market and offer an industry first low-profile fitment with aggressive styling. The Octane series rear bumper is designed as a one-piece bumper, and ships as one unit ready to bolt to your vehicle. The rear bumpers also feature corner steps as well as a built-in center step for ease of access. All of Chassis Unlimited’ s products are designed & manufactured in Livermore California.
Most installations are completed in a few hours or less with basic hand tools; the bumpers directly bolt on to your vehicle. Remove your factory bumper/mounts, and our product directly bolts onto your vehicle’s factory bumper mounting locations.
This bumper is designed to work with or with out your factory tow hitch.
Cutting of your factory bed is required for installation of this bumper.
Included Features:
- Includes Bolt on spare tire mount for up to 40” wheel/tire
- Single swing out W/ 2 position locking system
- Push button cam latch release system
- Front Frame Support arms for the High Clearance section of bumper included
- Ships fully assembled ready to install
- Manufactured from 3/16” USA Steel
- Includes LED License Plate Lights
- Recessed rear facing mounts for 3” LED Cube lights as back up lights (2)
- Each side of the bumper has integrated corner steps
- Includes heavy duty CNC Machined 1” Thick recovery points with a 1” Bore
- Designed & Manufactured in California
- Bumpers ships complete with 3-Stage Black Texture powder coat Finish
- LED LIGHTS, GAS CAN MOUNTS, SPARE TIRE, AND ACCESSORIES SOLD SEPARATELY
THIS PRODUCT REQUIRES FREIGHT SHIPMENT, AFTER PURCHASE YOU WILL BE CONTACTED TO CHECK FOR FREIGHT DELIVERY AVAILABILITY
Chassis Unlimited “Octane Series” swing out rear tire carrier bumper ships to your door ready to install on your truck, complete with 3-Stage texture black powder coat. This is our high-clearance bed cut version, allowing extreme departure angles and bed protection. Ships fully assembled ready to install
PRODUCT SHOWN WITH CUSTOM POWDERCOAT(NOT OFFERED) WILL SHIP WITH BLACK TEXTURE POWDERCOAT ONLY
The Octane series swing out bumper is our premium rear tire carrier bumper. Double latching swingout with slam bumpers allow a vibration free swing out and an easy open/close using our push button latch system. A secondary latch on the swing out spindle also allows locking in 2 positions- closed and open, so you don’t need to worry about holding your swing outs open while lowering your tail gate. Universal ½” Slots on both swing outs allow you to mount up to a 40” Spare tire/wheel, and all your favorite accessories. One spare tire mount is included with the purchase of the bumper.
This swing out tire carrier is manufactured with top-of-the-line components ensuring our product will last a lifetime of adventures. USA Premium rated hinge/spindles with billet aluminum caps, rubber bump stops ensuring a slam style close with no vibration, push button cam style release latches, ½” Pin secondary close and open stop, Includes spare tire mount with studs.
The Octane series bumper brings an entire new style to the bumper market and offer an industry first low-profile fitment with aggressive styling. The Octane series rear bumper is designed as a one-piece bumper, and ships as one unit ready to bolt to your vehicle. The rear bumpers also feature corner steps as well as a built-in center step for ease of access. All of Chassis Unlimited’ s products are designed & manufactured in Livermore California.
Most installations are completed in a few hours or less with basic hand tools; the bumpers directly bolt on to your vehicle. Remove your factory bumper/mounts, and our product directly bolts onto your vehicle’s factory bumper mounting locations.
This bumper is designed to work with or with out your factory tow hitch.
Cutting of your factory bed is required for installation of this bumper.
Included Features:
- Includes Bolt on spare tire mount for up to 40” wheel/tire
- Single swing out W/ 2 position locking system
- Push button cam latch release system
- Front Frame Support arms for the High Clearance section of bumper included
- Ships fully assembled ready to install
- Manufactured from 3/16” USA Steel
- Includes LED License Plate Lights
- Recessed rear facing mounts for 3” LED Cube lights as back up lights (2)
- Each side of the bumper has integrated corner steps
- Includes heavy duty CNC Machined 1” Thick recovery points with a 1” Bore
- Designed & Manufactured in California
- Bumpers ships complete with 3-Stage Black Texture powder coat Finish
- LED LIGHTS, GAS CAN MOUNTS, SPARE TIRE, AND ACCESSORIES SOLD SEPARATELY
THIS PRODUCT REQUIRES FREIGHT SHIPMENT, AFTER PURCHASE YOU WILL BE CONTACTED TO CHECK FOR FREIGHT DELIVERY AVAILABILITY
