Feed that P-pump the right way with the GDP 1/2" Dual Feed kit! Our kit uses all Parker fittings and 300 psi rated Parker hose but the big difference is in the metric adapters. Our metric adapters are stainless steel, custom made for the application, and use Cummins sealing washers and Viton O-rings for a perfect seal every time. The way thing should be. No cheap hydraulic adapter here!
Note 1: The plug on the front of the pump requires a 10MM hex key to remove. These plugs can be difficult to remove due to the factory applied sealant, so be careful!
Note 2: Make sure that all of the factory sealant is removed from the threads in the pump before installing front fitting!
Note 3: Does NOT Ship To California.
Feed that P-pump the right way with the GDP 1/2" Dual Feed kit! Our kit uses all Parker fittings and 300 psi rated Parker hose but the big difference is in the metric adapters. Our metric adapters are stainless steel, custom made for the application, and use Cummins sealing washers and Viton O-rings for a perfect seal every time. The way thing should be. No cheap hydraulic adapter here!
Note 1: The plug on the front of the pump requires a 10MM hex key to remove. These plugs can be difficult to remove due to the factory applied sealant, so be careful!
Note 2: Make sure that all of the factory sealant is removed from the threads in the pump before installing front fitting!
Note 3: Does NOT Ship To California.
