Synergy Jeep JK Weld-On Rear Track Bar Bracket to replace the thin and weak factory bracket
Fits:
- 07-18 Jeep Wrangler JK
- 07-18 Jeep Wrangler Unlimited JK
Details:
- Synergy JK Weld-On Rear Track-Bar Bracket
- Weld-On rear track-bar bracket designed to replace the weak factory JK track bar bracket
- Replace the thin factory brackets on a stock axle or use for swapping any axle into a JK
- Multiple Track-bar holes for suspension adjustments
- Designed to fit stock JK axle tubes, 3.150 inch diameter
- Will fit other diameter axle tubes with minor trimming
- Track bar relocation bolt holes are 2.900 Inch 3.713 Inch and 4.525 inch above the stock track bar mounting location
Note:
- Requires the use of a minimum 3 inch bump stop spacer for clearance with the exhaust. When using a lower relocation bolt hole or aftermarket exhaust, a shorter bump stop spacer may be used7
Product Details
Synergy Jeep JK Weld-On Rear Track Bar Bracket to replace the thin and weak factory bracket
Fits:
- 07-18 Jeep Wrangler JK
- 07-18 Jeep Wrangler Unlimited JK
Details:
- Synergy JK Weld-On Rear Track-Bar Bracket
- Weld-On rear track-bar bracket designed to replace the weak factory JK track bar bracket
- Replace the thin factory brackets on a stock axle or use for swapping any axle into a JK
- Multiple Track-bar holes for suspension adjustments
- Designed to fit stock JK axle tubes, 3.150 inch diameter
- Will fit other diameter axle tubes with minor trimming
- Track bar relocation bolt holes are 2.900 Inch 3.713 Inch and 4.525 inch above the stock track bar mounting location
Note:
- Requires the use of a minimum 3 inch bump stop spacer for clearance with the exhaust. When using a lower relocation bolt hole or aftermarket exhaust, a shorter bump stop spacer may be used7
