Thuren Fabrication | 1998.5-2002 Dodge Ram 2500 / 3500 Active Rate Sway Bar | 4-8 Inch Lift

Our Sway bar is a softer rate than the stock unit, allowing the axle to move more independently side to side. This smooths out off camber bumps, pot holes, and even simply turning into a drive way.

Fitment

• 1998.5-2002 Dodge Ram 2500/3500
• Does NOT fit 1994 to early 1998 axles with the "Cobra style" axle mount.

Details

• Uses no solid joints like Heim joints or solid bushings. In this application, Heims can become noisy very early in the life-cycle, with the Sway bar moving so much.
• 6 grease Zerk fittings used throughout the assembly.
• Same proven JKS Poly orbital joints as used in our other Sway bar links.
• Not recommended if you have a much higher center of gravity. For example, a slide in camper, or a heavy Roof Top Tent(RTT) equipped Overlanding build.
• Our Active Rate Sway Bar functions great with heavy Gooseneck and 5th wheel towing, heavy weight in the bed below the top rail, or heavy weight on the bumper receiver hitch.

Included

• Sway bar
• Frame mounts
• End links
• Bar clamps
• Hardware

NOTES

*0-4" Sway Bar applications can be used on taller lifts IF using a sway bar drop bracket.

**4-8" Sway Bar applications are to be used with NO sway bar drop bracket.